VBC Construzioni Agricole – Orchards/Vineyards

Burder Ag Attachments is the exclusive distributor for VBC Costruzioni Agricole in Australia. VBC products are available through Burder’s dealership network.


VBC       VBC 1

VBC is a specialist in manufacturing machines for the vineyard sector. VBC produces a wide range of machines such as vine trimmers, two blade vine trimmers, side-shoots removers, grape loaders, and olive and fruit pruner. Depending on the trimming requirements, trimmers can be adjusted vertically and horizontally to cater to vines of different sizes and height.

Safety

Safety

All products are tested and verified before leaving the factory to ensure safety standards are met.

Efficiency

Efficiency

Easy to adjust height and width settings for trimming hence enhancing productivity.

Quality

Quality

High quality materials used in the manufacturing of the product.

Tree Trimmer BF/F

Mod. BF/F:

VBC-TreeTrimmer

Vertical bar with a 280mm single bar Hydraulic adjustment by 2 piston Hydraulic height adjustment by 1 piston Optional 1mt upper bar Optional 70 cm lower bar 3 cm diameter cutting depth Works with hydraulic engines 3 cm cutting diameter Equipped with hydraulic piping Extra distributor on demand/electronic joystick Iron main frame Machine weight 200 kg. Resting platform.


Vine Trimmers

Mod. C4/V:

Mod-C4V

  • N. 2 vertical bars (right-left) with 4 blades each (working cut of 1600 mm)
  • N. 2 upper bar (right-left) with 2 blades each hydraulic adjustment (working cut of 800 mm)
  • Hydraulic adjustment by 2 pistons
  • Hydraulic height adjustment by 2 pistons
  • Hydraulic adjustment of the upper bar by 2 pistons
  • Hydraulic side adjustment by 2 pistons (shifting)
  • Special tempered steel blades of 420 mm
  • Joystick 8 funtions with blades speed regulator
  • Powered by 4 hydraulic engines (it required 150 bar pressure and 30 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with blades cases in stainless steel
  • Suitable to tractors from 80 HP – 49 kw
  • Machine weight 420 kg.
  • Operating capacity 2.2/2.5 hectare/hour, under normal working conditions.

Mod. C2/V

Mod-C2V

  • N. 2 pairs of vertical bars (2right-2left) with 4 blades per side (working cut of 1600 mm)
  • N. 2 upper bars with 2 blades (working cut of 800 mm)
  • Hydraulic adjustments by 2 pistons
  • Hydraulic height adjustment by 2 pistons
  • Hydraulic adjustment of the external side bars (shifting) by 2 pistons
  • Special tempered steel blades of 420 mm
  • Joystick 8-controls with blades speed regulator
  • Powered by 6 hydraulic engines (it required 160 bar pressure and 32 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with blades cases in stainless steel
  • Suitable to tractors from 80 HP – 59 kw
  • Machine weight 600 kg.
  • Operating capacity 2.4/2.8 hectare/hour, under normal working conditions
  • Hydraulic adjustment bars by 2 pistons

Mod CO Vertical:

Mod-CO-Vertical

  • Vertical bar with 4 blades (working cut of 1600 mm)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the side bar (shifting) by 1 piston
  • Special tempered steel blades of 420 mm
  • 4 – controls hydraulic distributor with blades speed regulator
  • Powered by 1 hydraulic engine (it required 150 bar pressure and 16 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with blades cases in stainless steel
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 140 kg.
  • Operating capacity 1.2/1.5 hectare/hour, under normal working conditions

Mod. CO:

Mod-CO

  • Vertical bar with 4 blades (working cut of 1600 mm)
  • Upper cut performed by 2 blades (working cut of 800 mm)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the upper bar by 1 piston
  • Hydraulic adjustment of the side bar (shifting) by 1 piston
  • Special tempered steel blades of 420 mm
  • 5-controls hydraulic distributor with blades speed regulator
  • Powered by 2 hydraulic engines (it required 150 bar pressure and 22 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with blades cases in stainless steel
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 160 kg.
  • Operating capacity 1.2/1.5 hectare/hour, under normal working conditions

Mod C1:

Mod-C1

  • Vertical bar with 3 blades (working cut of 1200 mm)
  • Upper cut with 2 blades (working cut of 800 mm)
  • Lower bar with 1 30 degrees tilting blade with mechanical adjustment (working cut of 400 m)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the upper bar by 1 piston
  • Hydraulic adjustment of the side bar (shifting) by 1 piston
  • Special tempered steel blades of 420 mm
  • 5-controls hydraulic distributor with blades speed regulator
  • Powered by 3 hydraulic engines (it required 150 bar pressure and 26 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with blades cases in stainless steel
  • Suitable to tractors from 50 HP – 36.3 kw
  • Machine weight 180 kg.
  • Operating capacity 1.2/1.5 hectare/hour, under normal working conditions

Vine Trimmer Reciprocating

Mod. Monoblade Vertical:

Mod-Monoblade-Vertical

  • Vertical bar with reciprocating cut (working cut 2000 mm)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the side bar (shifting) by 1 piston
  • 4-controls hydraulic distributor
  • Powered by 1 hydraulic engine (it required 150 bar pressure and 16 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractor from 35 HP – 25.5 kw
  • Machine weight 120 kg.

Mod. BF Monoblade:

Mod-BF-Monoblade

  • Vertical bar with reciprocating cut (working cut 2000 mm)
  • Upper bar with reciprocating cut (working cut 740 mm)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the upper bar by 1 piston
  • Hydraulic adjustment of the side bar (shifting) by 1 piston
  • 5-controls hydraulic distributor
  • Powered by 2 hydraulic engines (it required 150 bar pressure and 22 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 160 kg.

Mod. C4 Monoblade:

Mod-C4-Monoblade

  • N. 2 vertical bars (right-left) with reciprocating cut  (working cut of 2000 mm)
  • N. 2 upper bars (right-left) with reciprocating cut (working cut of 740 mm)
  • Hydraulic adjustment by 2 pistons
  • Hydraulic height adjustment by 1 piston
  • Mechanical regulation advanced bars
  • Hydraulic side adjustment by a double piston (shifting)
  • 5-controls hydraulic distributors
  • Powered by 4 hydraulic engines(it required 150 bar pressure and 30 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 50 HP – 36.3 kw
  • Machine weight 320 kg.

Mod. C2 Monoblade:

Mod-C2-Monoblade

  • N. 1 pair of vertical bars with reciprocating blades (working cut of 2000mm)
  • N. 1 upper bar with reciprocating blade (working cut of 800mm)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the side bars (shifting) by 1+1 pistons
  • 5-controls hydraulic distributor with blades speed regulator
  • Powered by 3 hydraulic engines (it required 150 bar pressure and 26 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 50 HP – 36.3 kw
  • Machine weight 260 kg.
  • Operating capacity 1.0/1.3 hectare/hour, under normal working conditions

A Two-Blade Vine Trimmer

Mod. BF Vertical two-blade:

Mod-BF-Vertical-two-blade

  • Vertical bar with a two-blade reciprocating cut (working cut 2000mm)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the side bar (shifting) by 1 piston
  • 4-controls hydraulic distributor
  • Powered by 1 hydraulic engine (it required 150 bar pressure and 16 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 120 kg.

Mod. BF two-blade: 

Mod-BF-two-blade

  • Vertical bar with a two-blade reciprocating cut (working cut 2000mm)
  • Upper bar with a two-blade reciprocating cut (working cut 740mm)
  • Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic adjustment of the upper bar by 1 piston
  • Hydraulic adjustment of the side bar (shifting) by 1 piston
  • 5-controls hydraulic distributor
  • Powered by 2 hydraulic engines (it required 150 bar pressure and 22 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractor from 35 HP – 25.5 kw
  • Machine weight 160 kg.

Mod. C4 two-blade:

Mod-C4-two-blade

  • N. 2 vertical bars with two-blade reciprocating cut (working cut of 2000mm)
  • N. 2 upper bar with two-blade reciprocating cut (working cut of 740mm)
  • Hydraulic adjustment by 2 piston
  • Hydraulic height adjustment by 1 piston
  • Mechanical regulation advanced bars
  • Hydraulic side adjustment by a double piston (shifting)
  • 5-controls hydraulic distributors
  • Powered by 4 hydraulic engines (it required 150 bar pressure and 30 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 50 HP – 36.3 kw
  • Machine weight 320 kg.

Mod. C2 two-blade:

Mod-C2-two-blade

  • N. 1 pair of vertical bars with double reciprocating blades (working cut of 2000mm)
  • N. 1 upper bar with reciprocating blade (working cut of 800mm)-Hydraulic adjustment by 1 piston
  • Hydraulic height adjustment by 1 piston – Hydraulic adjustment of the side bars (shifting) by 1+1 pistons – 5-controls
  • hydraulic distributor with blades speed regulator
  • Powered by 3 hydraulic engines (it required 150 bar pressure and 26 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 50 HP – 36.3 kw
  • Machine weight 260 kg.
  • Operating capacity 1.5/1.8 hectare/hour, under normal working conditions

Dry Pruner

Mod. PO with 10 shaped blades:

Mod-PO-10-shaped-blades

  • Tempered shaped blades diameter 410mm for pruning ESPALIER, GUYOT, RUNNER SYSTEM vines
  • Cut max. 780mm
  • Opening and closing by 1 hydraulic piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Powered by 2 hydraulic engines (it required 120 bar pressure and 22 litres/min of oil)
  • Engine’s rpm from 0 to 400
  • Equipped with pipes
  • Main frame in iron with blades casing in polycarbonate
  • Suitable to tractors from 80 HP – 59 Kw
  • Machine weight 400 kg.
  • Operating capacity 0.5/1 hectare/hour, under normal working conditions
  • Complete with JOYSTICK

Mod. PO with 8 shaped blades:

Mod-PO-8-shaped-blades

  • Tempered shaped blades diameter 410mm for pruning ESPALIER, GUYOT, RUNNER SYSTEM vines
  • Cut max. 480mm
  • Opening and closing by 1 hydraulic piston
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Powered by 2 hydraulic engines (it required 120 bar pressure and 22 litres/min of oil)
  • Engine’s rpm from 0 to 400
  • Equipped with pipes
  • Main frame in iron with blades casing in polycarbonate
  • Suitable to tractors from 80 HP – 59 Kw
  • Machine weight 360 kg.
  • Operating capacity 0.5/1 hectare/hour, under normal working conditions
  • Complete with JOYSTICK

Side Shoots Remover

Mod. SO:

Mod-SO

  • Simple machine without main frame
  • String in special rubber of 7mm low wearing, helically fixed
  • Powered by 1 hydraulic engine (it requires 100 bar pressure and 14 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with stainless steel protection
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 50 kg.
  • Operating capacity 3/4 hectare/hour, under normal working conditions

Mod. S1:

Mod-S1

  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Piston to emergency gas
  • String in special rubber of 7mm low wearing, helically fixed
  • 3-controls distributor with variable speed drive
  • Powered by 1 hydraulic engine (it requires 100 bar pressure and 16 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with stainless steel protection
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 110 kg.
  • Operating capacity 3/4 hectare/hour, under normal working conditions

Mod. S2:

Mod-S2

  • Machine with double shaft
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Piston to emergency gas
  • String in special rubber of 7mm low wearing, helically fixed
  • 3-controls distributor with variable speed drive
  • Powered by 2 hydraulic engines (it requires 140 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with stainless steel protection
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 140 kg.
  • Operating capacity 3/4 hectare/hour, under normal working conditions

Mod. SS1 overlapping:

Mod-SS1-overlapping

  • Machine with 1 double shaft (right-left)
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Hydraulic swinging by 1 piston
  • Hydraulic regulation external head (height)
  • External arm with piston to emergency gas
  • String in special rubber of 7mm low wearing, helically fixed
  • 5-controls distributor with variable speed drive
  • Powered by 2 hydraulic engines (it requires 150 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with stainless steel protection
  • Suitable to 50 HP – 36.5 kw min. tractors
  • Machine weight 220 kg.
  • Operating capacity 3.5/5 hectare/hour, under normal working conditions

Mod. S1 (dx-sx):

Mod-S1-dx-sx

  • Machine with 1 shaft right and 1 shaft left
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston double
  • Piston to gas of emergency on the heads
  • String in special rubber of 7mm low wearing, helically fixed
  • 3-controls distributor with variable speed drive
  • Powered by 2 hydraulic engines (it requires 140 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with stainless steel protection
  • Suitable to tractors from 50 HP – 36.5 kw
  • Machine weight 150 kg.
  • Operating capacity 3.5/5 hectare/hour, under normal working conditions

Mod. S2 (dx-sx):

Mod-S2-dx-sx

  • Machine with 1 shaft right and 1 shaft left
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston double
  • Piston to gas of emergency on the heads
  • String in special rubber of 7mm low wearing, helically fixed
  • 3-controls distributor with variable speed drive
  • Powered by 2 hydraulic engines (it requires 140 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Main frame in iron with stainless steel protection
  • Suitable to tractors from 50 HP – 36.5 kw
  • Machine weight 150 kg.
  • Operating capacity 3.5/5 hectare/hour, under normal working conditions

Rake

Mod. RO:

Mod-RO

  • Simple machine without frame
  • Powered by 1 hydraulic engine (it requires 100 bar pressure and 18 litres/min of oil)
  • Equipped with piping
  • Machine weight 50 Kg
  • Suitable to tractors from 35 HP – 25.5 Kw
  • Operating capacity 3/4 hectare/hour, under normal working conditions

Mod. R1:

Mod-R1

  • Machine with 1 rake
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Safety back movement by means of a spring
  • 3-controls distributor with variable speed drive
  • Powered by 1 hydraulic engine (it requires 100 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 35 HP – 25.5 kw
  • Machine weight 110 kg.
  • Operating capacity 3/4 hectare/hour, under normal working conditions

Mod. R1 (dx-sx):

Mod-R1-dx-sx

  • Machine with 1 rake right and 1 rake left
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • 3-controls distributor with variable speed drive
  • Powered by 2 hydraulic engines (it requires 150 bar pressure and 22 litres/min of oil)
  • Equipped with piping
  • Main frame in iron
  • Suitable to tractors from 50 HP – 36.5 kw
  • Machine weight 150 kg.
  • Operating capacity 3.5/5 hectare/hour, under normal working conditions

Leaves Cleaner

Mod. DO:

Mod-DO

  • Machine with the same performance as mod. D1, but without the support
  • Possible interchange with the side-shoots remover support
  • Machine weight 60 kg.
  • Operating capacity 0.8/1.2 hectare/hour, under normal working conditions
  • Suitable to tractors from 35 HP – 25.5 Kw

Mod. D1:

Mod-D1

  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Hydraulic swinging adjustment by 1 piston
  • Fan of 420mm diameter with 6 blades
  • Fan revolution per minute 3500rpm
  • Complete with Joystick
  • Powered by 1 hydraulic engine (it requires 150 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Working height with 1 fan from 600mm to 1000mm
  • Main frame in iron and conveyor in steel
  • Suitable to tractors from 40 HP – 29 kw
  • Machine weight 120 kg.
  • Operating capacity 0.8/1.2 hectare/hour, under normal working conditions

Mod. DG1 reversible:

Mod-DG1-reversible

  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Hydraulic swinging adjustment by 1 piston
  • Fan of 420mm diameter with 6 blades
  • Fan revolution per minute 3500rpm
  • 5-controls distributor with variable speed drive
  • Powered by 1 hydraulic engine (it requires 150 bar pressure and 20 litres/min of oil)
  • Turning variator
  • Equipped with piping
  • Working height variable with 1 fan 600mm
  • Main frame in iron and conveyor in steel
  • Suitable to tractors from 50 HP – 36.5 kw
  • Machine weight 130 kg.
  • Operating capacity 0.8/1.2 hectare/hour, under normal working conditions

Grape Loader

Grape-Loader

  • Manufacture with a main frame in iron
  • Oil dynamic cylinder with chrome-plated stem
  • Double-acting hydraulic system
  • Bucket tipping by means of 2 hydraulic pistons
  • Removing footsies
  • Manufactured in stainless steel
  • 2-control distributor
  • Equipped with piping
  • N.B. The height’s discharge could change according to the type of tractor

Leaf Remover

Mod. DSO:

Mod-DSO

  • Machine with the same performance as mod. DS1, but without the support
  • Possible interchange with the side-shoots remover support
  • Machine weight 62 kg.
  • Operating capacity 0.8/1.2 hectare/hour, under normal working conditions
  • Suitable to tractors from 35 HP 25.5 Kw

Mod. DS1

Mod-DS1

  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Hydraulic swinging adjustment by 1 piston
  • Cutting height 500mm
  • Complete with Joystick
  • Powered by 2 hydraulics engines (it requires 150 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Working height from 600mm to 1100mm
  • Main frame in iron
  • Suitable to tractors from 40 HP 29 kw
  • Machine weight 120 kg.
  • Operating capacity 0.8/1.2 hectare/hour, under normal working conditions

Mod. DGS1: 

Mod-DGS1

  • Hydraulic regulation of the reversibility
  • Hydraulic height adjustment by 1 piston
  • Hydraulic side adjustment by 1 piston
  • Hydraulic swinging adjustment by 1 piston
  • Cutting height 500mm
  • Complete with Joystick
  • Powered by 2 hydraulics engines (it requires 150 bar pressure and 20 litres/min of oil)
  • Equipped with piping
  • Working height from 600mm to 1100mm
  • Main frame in iron
  • Suitable to tractors from 50 HP 36.5 kw
  • Machine weight 130 kg.
  • Operating capacity 0.8/1.2 hectare/hour, under normal working conditions

Olive and Fruit Pruner

Mod. PJ: 

Mod-PJ

  • The Pruner series PJ had a solid iron frame and weigh approximately 400Kg with a blade case with a 2,5 mt cutting height.
  • The blades have a diameter of 400mm, are in tempered steel and have cogs with widia plates to optimize the work.
  • The maximum cutting height is 6mt and thanks to the arrangement of the oleo dynamic cylinders the cutting options are several.
  • The machine disposes of an 50 litre oil tank that enables a perfect work of the motors.
  • An electric joystick regulates all the movements simplifying the use.
  • The machine has furthermore a standard support to store the machine after the use.

Click Here to Download the VBC Brochure  Click Here to Visit the VBC Website