Rabe – Ploughs

ALBATROS – MOUNTED PLOUGHS

ALBATROS COMPACT REVERSIBLE MOUNTED WITH SOPHISTICATED FRAME GEOMETRY.
Already in its smallest version with 110 mm frame the ALBATROS has a sophisticated frame geometry. The first body is close to the headstock. This facilitates the tractor hydraulics to lift the plough. And take a look at the adjustment of the cutting width of the first body: it is designed to require no adjustment of the traction point (cutting width adjustment hydraulic optional). And of course you can equip the ALBATROS with all variants of the famous RABE mouldboards.

Variant – with Variant you can adjust the working width of the bodies from 31 to 53 cm – easily from the tractor cabin. The true line of the plough always runs in the middle of the tractor rear axle – depth wheel , disc coulter and coulters will change accordingly. A separate hydraulic cylinder is responsible for pivoting the frame before and after the turning process , leaving the working width untouched!

HYDRAULIC STONE PROTECTION – HYDRO AVANT
All RABE ploughs are secured against stones with a shear bolt protection. Additionally the Hydro Avant option provides a hydraulic non-stop stone protection. It allows each pair of bodies to dodge upward and / or sideways. The triggering pressure is adjustable from the tractor and is decreasing with higher lift heights automatically – to protect all components.

HYDRAULIC CUTTING WIDTH ADJUSTMENT OF THE FIRST BODY  (HYDRAULIC FRONT FURROW)
For ploughing in greatly varying slopes , we offer a cutting width adjustment of the front furrow by hydraulics.

HYDRAULIC FRAME ALIGNMENT
Starting with all five furrow models as standard, the hydraulic frame allignment can be ordered for smaller ploughs as an option.

SKIMMER
For fertilizer or corn skimmer you generally have the choice between plane shafts with plugged bolts ( for rapid and uniform setting ) or round shafts with gear rim protection (for variable and precise setting).

DISC COULTERS
You have the choice between knife- or disc coulter, the latter in rigid (500mm ) or spring-loaded design (600 mm ).

WHEELS
Wheels are available as an option for our mounted ploughs. The jockey wheel is used for depth control ( with bump stops for damping when turning ), the spring hinge option ensures that the wheel escapes after turning towards the tail. For a gentle and safe road transport, the transport/depth wheel, which is automatically routed to the rear when turnings done. With an additional hydraulic cylinder equipped, the working depth can be changed even during ploughing.

 

*Please contact Burder for the actual details


SUPER ALBATROS – MOUNTED PLOUGHS

“SUPER-ALBATROS – LARGE MOUNTED REVERSIBLE PLOUGH FOR MEDIUM AND LARGE ENTERPRISES
Based on the ALBATROS the SUPER-ALBATROS has the same frame geometry with all its advantages. By use of a stronger frame with 140 mm or 160 mm diameter and an equally stronger turning pivot (120 mm), it is also suitable for use in heavy and heaviest soils and for tractors power up to 300 hp.

STEPLESS ADJUSTMENT OF THE WORKING WIDTH – VARIANT
Starting with the ALBATROS 120 we offer the option Variant. With Variant you can adjust the working width of the bodies from 34 to 53 cm – easily from the tractor cabin (31 to 50 cm for VHA 140 with 90 cm interbody distance). The true line of the plough always runs in the middle of the tractor rear axle – depth wheel , disc coulter and coulters will change accordingly. A separate hydraulic cylinder is responsible for pivoting the frame before and after the turning process, leaving the working width untouched!

HYDRAULIC STONE PROTECTION – HYDROAVANT
All RABE ploughs are secured against stones with a shear bolt protection. Additionally the Hydro Avant option provides a hydraulic non-stop stone protection. It allows each pair of bodies to dodge upward and / or sideways. The triggering pressure is adjustable from the tractor and is decreasing with higher lift heights automatically – to protect all components.

HYDRAULIC CUTTING WIDTH ADJUSTMENT OF THE FIRST BODY (HYDRAULIC FRONT FURROW)
For ploughing in greatly varying slopes we offer a cutting width adjustment of the front furrow by hydraulics.

HYDRAULIC FRAME ALIGNMENT
Starting with all five furrow models as standard, the hydraulic frame alignment can be ordered for smaller ploughs as an option.

SKIMMER
For fertiliser or corn skimmer you generally have the choice between plane shafts with plugged bolts (for rapid and uniform setting) or round shafts with gear rim protection (for variable and precise setting).

DISC COULTERS
You have the choice between knife- or disc coulter, the latter in rigid ( 500mm ) or spring-loaded design ( 600 mm ).

WHEELS
Controlling you ploughing depth more accurately: Depth wheels definitely can help to control the desired and even depth from the first to the last bottom more accurately.
Transport wheels combine two applications in one and allow a fast conversion from road to field mode. It’s the right choice for larger and heavier mounted ploughs for a smooth transport of the plough on the road. We offer the transport wheel D30 and the depth wheels PS5, PS30 and RJR.

 

*Please contact Burder for the actual details


KORMORAN – SEMI MOUNTED PLOUGHS

 

COMPACT SEMI MOUNTED PLOUGH FOR LARGER AREAS
The KORMORAN PF is the ultimate choice in tough field conditions to add maximum productivity to your operation with up to 9 furrows (depending on the configuration).
It features a hydraulic cutting width adjustment with a parallelogram arm in base for increased durability. To offer superior versatility it can be ordered with a
variable adjustment of working width and a HYDRO AVANT non-stop overload protection.

KORMORAN PL ONLAND PLOUGH
The KORMORAN PL combines high performance with maximum versatility. Whatever your specific field conditions demand: for full grip you can plough in-furrow or
on-land and use high horsepower tractors with wide tyres.

This is made possible by the ” kink” in the frame. The “kink” also ensures the last body ploughs off the wheel tracks and it keeps the center of gravity closer to the wheel – which brings benefits both for ploughing and driving on the road. Because the plough no longer has to be lifted higher than needed.

If you previously didn’t take a semi mounted plough into account – now test the KORMORAN !

VARIANT: HYDRAULICAL ADJUSTMENT OF WORKING WIDTH
By changing the hydraulic pressure from the tractor cab the cutting width can be adjusted. The Variant hydraulic cylinder moves and controls the position of all bodies
which are connected by push rods. At the same time the cylinder aligns the wheel always parallel to the bodies. All connections and hinges between the push rods feature
bushings to ensure an equal cutting width between all bodies with minimum tolerances and no clearance, even after years of operation.

HYDRAULIC STANOE PROTECTION – HydroAvant
All RABE plooughs are secured against stones with a shear bolt protection. Additionly the Hydro Avant option provides a hydraulic non-stop stone protection. It allows each pair of bodies to dodge upward and / or sideways. The triggering pressure is adjustable from the tractor and is decreasing with higher lift heights automatically – to protect all components.

SKIMMER
For fertilizer or corn skimmer you generally have the choice between plane shafts with plugged bolts ( for rapid and uniform setting ) or round shafts with gear rim protection ( for variable and precise setting ).

DISC COULTERS
You have the choice between knife- or disc coulter, the latter in rigid (500mm) or spring-loaded design (600 mm).

*Please contact Burder for the actual details


Visit the Rabe Website